CLOSE

Specials

  • Construction Equipment
  • Apartment and Condominium Contractors Canada
  • Decking Canada
  • Architectural Glass Europe
  • MEP APAC
  • Construction Saudi Arabia
  • German Apartment and Condominium Contractors
  • Construction Law APAC
  • Outdoor Construction
  • Foundation Construction Canada
  • MEP Canada
  • Cold Storage Construction Canada
  • Cold Storage Construction APAC
  • Precast Concrete Europe
  • Construction Staffing Europe
  • Pre-Construction Services
  • Flooring System APAC
  • Scaffolding Canada
  • Swimming Pool Construction Canada
  • Construction Management Canada
  • Construction Insulation, Coating and Waterproofing
  • Flooring Systems Europe
  • Residential Construction
  • Concrete Canada
  • Construction Cladding Europe
  • Construction Cladding APAC
  • Concretes, Aggregates and Construction Materials APAC
  • Concretes, Aggregates and Construction Materials Europe
  • Commercial Contractors Europe
  • Commercial Contractors APAC
  • Dummy
  • Kitchen and Bath
  • Construction Management APAC
  • Landscaping Canada
  • Construction Coating Europe
  • Construction Tech Startups Europe
  • Insulation Services Europe
  • Mechanical Contractor Canada
  • Mould Remediation and Testing Europe
  • Swimming Pool Construction APAC
  • Building Sealing Solutions Europe
  • Construction Engineering Services
  • Mechanical Electrical and Plumbing
  • Roofing Systems Europe
  • Architectural Glass APAC
  • Startups APAC
  • Construction Forensic and Owners Representative
  • Flooring System
  • Waterproofing APAC
  • Wall Systems
  • Safety and Compliance Europe
  • Construction Cladding
  • Modular and Prefab Construction
  • Architectural Glass
  • Construction MENA
  • Construction Demolition and Recycling Europe
  • Modular Construction Europe
  • Construction Interiors
  • Steel Building APAC
  • HVAC
  • Doors and windows
  • Modular Construction APAC
  • Building Information Modeling APAC
  • Sustainable Construction APAC
  • Building Restoration and Maintenance
  • Commercial Contractors
  • Specialty Construction
  • Construction Engineering Canada
  • Construction Engineering MENA
  • Modular Construction Canada
  • Construction Demolition Canada
  • Roofing and Siding Systems
  • Construction Latam
  • Construction Staffing
  • Roofing Systems APAC
  • Construction Consulting
  • Steel Building Europe
  • Construction Demolition and Recycling APAC
  • Safety and Compliance APAC
  • Concretes, Aggregates and Construction Materials
Skip to: Curated Story Group 1
Construction Business Review
US
EUROPE
APAC
CANADA
MENA
LATAM
AUSTRALIA

Advertise

with us

  • APAC
    • US
    • EUROPE
    • APAC
    • CANADA
    • LATAM
    • AUSTRALIA
  • Home
  • Sections
    Architectural Glass
    Building Information Modeling
    Cold Storage Construction
    Commercial Contractors
    Concretes, Aggregates and Construction Materials
    Construction Cladding
    Construction Demolition and Recycling
    Construction Law
    Construction Management
    Flooring System
    MEP
    Modular Construction
    Roofing Systems
    Safety and Compliance
    Startups
    Steel Building
    Sustainable Construction
    Swimming Pool Construction
    Waterproofing
    Architectural Glass
    Building Information Modeling
    Cold Storage Construction
    Commercial Contractors
    Concretes, Aggregates and Construction Materials
    Construction Cladding
    Construction Demolition and Recycling
    Construction Law
    Construction Management
    Flooring System
    MEP
    Modular Construction
    Roofing Systems
    Safety and Compliance
    Startups
    Steel Building
    Sustainable Construction
    Swimming Pool Construction
    Waterproofing
  • Contributors
  • Vendors
  • News
  • Conferences
  • Awards

Thank you for Subscribing to Construction Business Review Weekly Brief

  • Home
  • Contributors

A Developers Guide to Helping the Contractor Get Dry.

Chris Hauska, National Director of Quality Assurance, Gables Residential
Tweet

It’s hard to overstate the importance of dry milestones to a construction project. Whether those milestones be intermediate or final, whether the project be a small tenant fit out or a multi-phase campus, I doubt that anyone reading this needs convincing as to the importance of getting and staying dry.


"Performing due diligence early on by engaging a variety of subject matter experts is essential to the decision-making process"


As a Developer, construction schedule milestones hold an interesting place of priority. On one hand, achieving commitments set forth in the contract schedule are largely the Contractor’s prerogative. On the other, the Developer has agreed to the schedule and has vested interest that the contractor hits their dates so they can start generating returns.


The question for the Developer then becomes: where can they best influence the construction schedule without taking on undue risk?


As with almost all Owner-related impacts to a construction project, timely and decisive decision making is paramount. Even in the more normal times of just a few years ago, storefront, curtainwall, windows, and many other critical components carried lead times measured in months not weeks. Although not as significant from a procurement perspective, it’s just as important to understand and select the appropriate air / vapor barrier. We can always pay to get a building gold plated, submersible, and ready to set up on the moon but sometimes building wrap is just fine.


Performing due diligence early on by engaging a variety of subject matter experts is essential to the decision-making process. The days of getting a set of documents from an Architect and blindly relying on them to be appropriate are largely behind us. Engage the full design team, envelope consultants, and if possible Trade Partners early on. All parties have the same end goal and perhaps most importantly all parties come at that end goal from slightly different angles. Said more succinctly: ask the right questions, ask hard questions, decide, and stick with the decision unless circumstances absolutely demand a change. Very little sets a building back further quicker than late design changes.


The Developer has an additional role to play prior to execution. As the controlling entity it’s important to manage the Contractor and the Design Team to ensure that these critical-path submittals are turned around in timeframes that meet and if at all possible exceed contract requirements.


With materials selected and the delivery clock started, the team will now start to tee envelope execution up for success. An often-underutilized best practice is constructing and testing a full-scale mockup wall. Mockup panels can serve many purposes – including aesthetic – but all too often the high price tag of a full-sized wall with representative details can scare an Owner into choosing “simpler” options. Rest assured that finding even one issue with a mockup will generally pay for itself during production, and even if no deficiencies are identified the cost of a mockup weighed against the total project cost or the cost of major or systemic failures is generally very cheap insurance.


 


While not exhaustive, below are some points to keep in mind when specifying a mockup wall.


• Include the design in the contract documents. It’s not breaking new ground to state that contract inclusions are more cost effective than change orders.


• Include as many representative openings in the design as practical, even if they are not sized as depicted in the contract documents. A 24” x 24” window will have the same joints, seals, and components as its full-sized counterparts. Consider windows, transoms, swing doors, sliding doors, vents, louvers, etc. Field-built assemblies should be given special consideration.


• Include as many representative material changes and flashings as practical, including typical details, unique details, inside corners, outside corners, roof transitions, etc. Incorporate as many failure points as possible. Typical issues cover the majority of the project while unique details should cover challenging aspects.


• Begin mockup construction as soon as possible once materials are approved. If that means the mockup needs to be offsite, so be it.


• Require that the Trade Partner identify and use the foreman and at to the extent possible at least one technician that will be on the job to construct the mockup. This may be difficult far in advance but should not be impossible. Further, the tradesmen constructing the mockup should be production workers, not “artists”. The point is to create a reproducible sample of how the asset is going to perform, not do the best job possible for a high-profile set of inspections.


• Test each component of the mockup as you would test the building. In the event of a failure, don’t take the easy route and caulk up an issue just to get a passed test – the intent is to identify as many root cause issues as possible before material hits the production line or the installers’ hands.


• Oftentimes a Contractor will request that a mockup be performed in-situ. While possibly advantageous to production, a mockup rarely if ever passes all tests and inspections the first time if for no other reason than the design details need further hashing out. Additionally, when a deficiency is identified in an in-place mockup, schedule constraints have invariably dictated that production continue in parallel with mockup approvals. At that point, you have lost your chance to get in front of a myriad of design, manufacturing, or installation issues that may arise.


With envelope materials selected, in production, and having passed front-line installation vetting, the Developer, Design Team, Contractor, and Trade Partners can now concentrate proactive efforts on getting dry and starting interiors rather than reacting to issues that inevitably arise. While it’s easy to point to the contract documents and just tell the Contractor to get it right, it’s in all stakeholders’ best interests to take a team-based approach. Through thoughtful design decisions, team management, and the use of a performance mockup, the Developer has a unique opportunity to invest time in low- to no-risk action up front that will pay dividends once material hits the jobsite.


  • CUSHMAN & WAKEFIELD [NYSE: CWK]

    Projects Today Come Down to Nerves of Steel and Realistic Expectations

    Jason D’Orlando, Senior Managing Director, Cushman & Wakefield, Michael Morehead, Senior Director, Project and Development Services - Industrial, Cushman & Wakefield

  • WALMART [NYSE: WMT]

    Navgating the Challenges and Innovations in Mega Construction Projects: Building Competent Leadership and Embracing Technological Trends

    Seth Roy, Senior Director - Design & Construction, Walmart

  • MERITAGE HOMES

    Act Now to Address Aging Workforce

    Poli Peters, VP of Operations, Meritage Homes

  • ADVANCED DRAINAGE SYSTEMS [NYSE: WMS]

    Walking the sustainability walk: The case for EPR

    Brian King, EVP Marketing, Product Management and Sustainability, Advanced Drainage Systems

  • TOLL BROTHERS [NYSE: TOL]

    Transforming Construction: Overcoming Challenges And Embracing Technological Trends

    Korey Herndon, Safety Director, Toll Brothers

  • PORTLAND GENERAL ELECTRIC

    The Future of Construction Management

    Ken Pitta, Senior Construction Manager at Portland General Electric [NYSE: POR]

  • BRIXMOR PROPERTY GROUP

    Navigating the Landscape of Retail Project Management: Strategies for Success

    T.J. McKeever, Senior Project Manager, Brixmor Property Group

Copyright © 2025 Construction Business Review All rights reserved. |  Subscribe |  Newsletter |  Sitemap |  About us|  Editorial Policy|  Feedback Policyfollow on linkedin
This content is copyright protected

However, if you would like to share the information in this article, you may use the link below:

https://construction-equipment.constructionbusinessreviewapac.com/cxoinsight/a-developers-guide-to-helping-the-contractor-get-dry-nwid-412.html

We use cookies on this website to enhance your user experience. By clicking any link on this page you are giving your consent for us to set cookies. More info

I agree